Discussion in 'Laptop Support' started by Spartak, Dec 4, 2011.
proceed with y until program reports its installed
I typed Y and it completed the install.
Now it's a blue and grey screen in the little window.
Its asking me:
Select type of mail configuration
Internet with Smarthost
OK or Cancel
no configuration needed local only choose none if you cant choose cancel
ok, i chose No Configuration and it carried on doing stuff.
Lots of text came up and now, disk was spinning. Disk has now stopped and it is saying:
Processing triggers for menu...
it came up with a window saying:
An error occured while scanning the system
It seems that smartctrl doesn't have enough permissions to access devices
Show output OK
It says command no found when i type in "sudo smartcontrol"
when you got that error was it gsmartcontrol you typed? sorry my typo
Ok, type it in correctly and now it is showing:
right click that drive and select test, or something to that effect and select short test click execute button to start when it is done click view output and post the output please
ok,i chose the Short Self Test and it will take 2 mins it says... will post when its done.
Ok, the test is done and came back with "No Errors".
I clicked View Output and it opens a box with lots of txt... which part do you need?
I'm working on a seperate latop so cnt copy and paste but will type up whatever you need.
thats ok if it passed the hard drive should be fine you might like to do a long test to verify this however, could you also post a link to your previous thread. you may have a partitioning issue here.
smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, smartmontools
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HTS545032B9A300
Serial Number: 091025PBH306Q6DD424V
Firmware Version: PB3OC60F
User Capacity: 320,072,933,376 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Tue Jan 3 20:33:03 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
Offline surface scan supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 106) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 141 141 033 Pre-fail Always - 2
4 Start_Stop_Count 0x0012 095 095 000 Old_age Always - 7883
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 092 092 000 Old_age Always - 3525
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 3256
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 53
193 Load_Cycle_Count 0x0012 090 090 000 Old_age Always - 104510
194 Temperature_Celsius 0x0002 114 114 000 Old_age Always - 48 (Lifetime Min/Max 11/54)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 43
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 24
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
Separate names with a comma.