could we have the model number of the mentioned monitor you purchased please
start by removing 1 component at a time and trying to power on for each removal.
Id advise that too if he had thousands of dollars but I dont think thats the case :)
I dont think the pcb is bad decrypted im looking at this from a firmware perspective as well if it can be interfaced properly you could get some real...
appears that wasnt your last comment wolfy please take my advice
getting a bit scaredc in your old age wolfey :)
I dont know what do you think?
I will shame you wont be around to see it
dont embarass yourself wolfey
just post in your thread please so everybody else may learn
Its a relatively simple process, id be happy to walk you through it
with that information in mind get the best you can afford seasonic corsair and antec come to mind. make sure it meets the following requirements...
ben read post #5
go here http://extreme.outervision.com/psucalculator.jsp and keep future expansion in mind please post the model number of the current psu you have...
If the smell is coming from the PSU its probaly the psu ":) unstable or erratic voltage can wreck havoc with a pc inspect the board for visible signs...
For the best RAM genrally speaking corsair and kingston is great however go to your motherboard manufacturers website and take a look at the QVL for...
make sure its at least 80+bronze certified and if you have a couple your choosing from pick the heaviest one. Antec as well as seasonic <--- own...
As soon as I have everything in order and am 100% its all we will require I shall.
observe those points labelled Ex a few of these your going to have to solder onto if you burn the board at any stage your done.
its ok just found its not a problem on elements drives. were going to need an old ribbon cable a multimeter and some tin/lead solder flux cored youll...
Separate names with a comma.
