I purchased a Buffallo router (it is a rurbo G airstation one) and a usb card thingy so my other pc gets connected to this router (router is in living room usb adapter in my bedroom) and the router is working (im typing now =\) but when I try to connect my pc upstairs (with the usb thing)
it connects but web pages not showing =[[

I have virgin media internet modem thingy =\

PLEASE HELP ME NEED INTERNET =[[[[[ (I work from home on internet and one in front room my house mate uses)

PLEASE HELP =[[[[[[[[[[[[[[[[[[[[[[[ my msn/email is **removed** PLEASE HELP.

THANKS IN ADVANCE I HOPE =[[ (I will get fired if I dont work =[[)

Hello godfromdfo, welcome to PCHF.

I've removed your e-mail link before you start to receive an influx of SPAM.

What is your signal strength from the PC upstairs? Are you using the same wireless USB device you use for your laptop? When you say the web pages are now showing, are you received a white page from Internet Explorer, or do you receive an error "Page Cannot be Displayed"?

It's about 3 stroke things/average I dont have a laptop =[ the usb adapter im using is the same make as the router and also has AOSS and the pages say page cannot be displayed =[[

please help =[[

Hi god,

From the PC that is not working, can you do the following for me:

- Go to Start, Run, and type in cmd
- From the command window, type in ipconfig /all
- Right click on the titlebar, and go to Edit, followed by Select All
- Right click again, and go to Edit, followed by Copy

- Paste the document into notepad or word, whatever you have available. Save it to disk or memory stick and open it up on a PC that can connect to the internet. Paste the contents back here.

The medium signal your getting is from the Air Station. In this case, the station is probably not getting a strong enough signal from the router, so that it can forward the signal on. The ipconfig should tell us if there is any connection to the router.

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Cloud>ipconfig /all
Windows IP Configuration

C:\Documents and Settings\Cloud>ipconfig/all
Windows IP Configuration

C:\Documents and Settings\Cloud>ipconfig/ all
Error: unrecongnized or incomplete command line.
USAGE:
ipconfig [/? | /all | /renew [adapter] | /release [adapter] |
/flushdns | /displaydns | /registerdns |
/showclassid adapter |
/setclassid adapter [classid] ]
where
adapter Connection name
(wildcard characters * and ? allowed, see examples)
Options:
/? Display this help message
/all Display full configuration information.
/release Release the IP address for the specified adapter.
/renew Renew the IP address for the specified adapter.
/flushdns Purges the DNS Resolver cache.
/registerdns Refreshes all DHCP leases and re-registers DNS names
/displaydns Display the contents of the DNS Resolver Cache.
/showclassid Displays all the dhcp class IDs allowed for adapter.
/setclassid Modifies the dhcp class id.
The default is to display only the IP address, subnet mask and
default gateway for each adapter bound to TCP/IP.
For Release and Renew, if no adapter name is specified, then the IP address
leases for all adapters bound to TCP/IP will be released or renewed.
For Setclassid, if no ClassId is specified, then the ClassId is removed.
Examples:
> ipconfig ... Show information.
> ipconfig /all ... Show detailed information
> ipconfig /renew ... renew all adapters
> ipconfig /renew EL* ... renew any connection that has its
name starting with EL
> ipconfig /release *Con* ... release all matching connections,
eg. "Local Area Connection 1" or
"Local Area Connection 2"
C:\Documents and Settings\Cloud>ipconfig / all
Error: unrecongnized or incomplete command line.
USAGE:
ipconfig [/? | /all | /renew [adapter] | /release [adapter] |
/flushdns | /displaydns | /registerdns |
/showclassid adapter |
/setclassid adapter [classid] ]
where
adapter Connection name
(wildcard characters * and ? allowed, see examples)
Options:
/? Display this help message
/all Display full configuration information.
/release Release the IP address for the specified adapter.
/renew Renew the IP address for the specified adapter.
/flushdns Purges the DNS Resolver cache.
/registerdns Refreshes all DHCP leases and re-registers DNS names
/displaydns Display the contents of the DNS Resolver Cache.
/showclassid Displays all the dhcp class IDs allowed for adapter.
/setclassid Modifies the dhcp class id.
The default is to display only the IP address, subnet mask and
default gateway for each adapter bound to TCP/IP.
For Release and Renew, if no adapter name is specified, then the IP address
leases for all adapters bound to TCP/IP will be released or renewed.
For Setclassid, if no ClassId is specified, then the ClassId is removed.
Examples:
> ipconfig ... Show information.
> ipconfig /all ... Show detailed information
> ipconfig /renew ... renew all adapters
> ipconfig /renew EL* ... renew any connection that has its
name starting with EL
> ipconfig /release *Con* ... release all matching connections,
eg. "Local Area Connection 1" or
"Local Area Connection 2"
C:\Documents and Settings\Cloud> ipconfig /all
Windows IP Configuration

C:\Documents and Settings\Cloud>ipconfig /all
Windows IP Configuration

C:\Documents and Settings\Cloud>

lol, OK, can you go to My Computer, Control Panel, System, Hardware tab, Device Manager. Can you see your Wireless adaptor under the group "Network Adaptors"? Right click on your wireless adaptor, and go to Properties. Under "Device Status", can you tell me what it says?