I need some help from you guys... I bought a Raid controller yesterday when i Plug in the Controller on PCI bank of mother board it detect perfectly. Here are my problem: I dont have any floopy drive on my PC. On manufacturer instruction it need a floppy drive to copy the raid driver sis. Is there any way to configure thisproblem without using any floppydrive? and what are the step by step of configuring it?

By the way I want to attach to this raid controller 1 HDD IDE and 2 DVD Writer also IDE. I want to do this because my Mother Board have one IDE slot all of the slot for the HDD and ROM are ATA.

Thanks for helping and giving advice...

Ok FREN,for one you can buy double,triple IDE leads that all connect to one slot on MB.The same applies to installing more than one DVD/CD rom,you again can buy double and triple IDE leads.However does your computer have enough power ports to connect all these preferals?

With the floopy if you can use some one elses floppy drive to install the drives?Or try using a freinds floppy drive and transfere the drives to DVD/CD rom that may work.The choice then if no is to either buy an internal floppy drive or an external one.

If you gave us the name and model of the HDD then maybe the drives could be downloaded from there website?

Thanks