Microsoft says no updates needed...

links would be great, thank you so much!

If you need some additional info here is what I came up with;

Operating System Windows XP Professional Service Pack 2 (build 2600)
System Model Enclosure Type: Desktop
Processor a
450 megahertz Intel Pentium II
Main Circuit Board b
32 kilobyte primary memory cache
512 kilobyte secondary memory cache
Board: Tyan Computer Corp. Intel 440BX/GX Rev. 4
Bus Clock: 100 megahertz
BIOS: American Megatrends Inc. 063100 07/15/95
Drives Memory Modules c,d
70.79 Gigabytes Usable Hard Drive Capacity
39.09 Gigabytes Hard Drive Free Space

HP CD-Writer+ 9100 [CD-ROM drive]
3.5" format removeable media [Floppy drive]

FUJITSU MPD3108AT [Hard drive] (10.80 GB) -- drive 1, s/n 01005302, rev DD-03-44, SMART Status: Healthy
WDC WD600BB-00CAA1 [Hard drive] (60.02 GB) -- drive 0, s/n WD-WMA8E5144293, rev 17.07W17, SMART Status: Healthy

320 Megabytes Installed Memory
Slot '0' has 128 MB
Slot '1' has 128 MB
Slot '2' has 64 MB
Local Drive Volumes


c: (FAT32 on drive 0) 60.01 GB 34.47 GB free
d: (FAT32 on drive 1) 10.79 GB 4.62 GB free

Network Drives None detected

Printers HP DeskJet 930C/932C/935C on LPT1:


Microsoft Office Document Image Writer Driver on Microsoft Document Imaging Writer Port:

Controllers &nbspisplay
Standard floppy disk controller
Intel(R) 82371AB/EB PCI Bus Master IDE Controller
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller] S3 Graphics Inc. Savage4 [Display adapter]
NEC FE700 [Monitor] (16.1"vis, s/n 9X27020AA, October 1999)
Bus Adapters Multimedia
Intel(R) 82371AB/EB PCI to USB Universal Host Controller
Game port for Yamaha DS1
YAMAHA Legacy DS1 WDM Driver
YAMAHA Native DS1 WDM Driver
Communications Other Devices


3Com EtherLink XL 10/100 PCI For Complete PC Management NIC (3C905C-TX)
primary
PC/AT Enhanced PS/2 Keyboard (101/102-Key)
Microsoft PS/2 Mouse
NT Apm/Legacy Interface Node

Here are some of the drivers you need:

3Com EtherLink XL 10/100 PCI For Complete PC Management NIC (3C905C-TX)

HP DeskJet 930C/932C/935C

YAMAHA Native DS1 WDM Driver
YAMAHA Legacy DS1 WDM Driver
For these goto CodecInstaller
Read it, then install the CodecInstaller
Run it and it should help you get the sound codecs.
When you are done, do the driver scan again to see what you still need.

Let me know if you have the same problems installing any of these drivers.

Good Luck...

everythings good except for the yamaha driver but I am good with the one I am currently using...Thanks

Still no usb ports though ....ugh

On the resullts the Intel(R) 82371AB/EB PCI to USB Universal Host Controller shows as good.

Place your XP CD into the drive.
Go to the Command Prompt
Enter the command: sfc /scannow
Note: there is a space between the "c" and the "/"

done whats next?