Scan your PC for Errors

Member Panel


Sponsors and Ads

Noticeboard

PC Forum PC Help Forum » Hardware » Processor/CPU » [Answered] help upgrading to dual core

Processor/CPU - help upgrading to dual core posted in the Hardware forums; I have a Asrock Wolfdale1333 D667 motherboard that came with a Celeron D 3.46 Mhz cpu . - 2 gig DDR2 RAM As far as I could read, I can't ...

JOIN US NOW to remove these Ads

Post New Thread  Reply
  #1  
Old 09-07-2008
New Poster
 
Join Date: Sep 2008
Posts: 2
PC Experience: Experienced
cooldude859 - See this Members User comments on their Profile page
Arrow help upgrading to dual core

I have a Asrock Wolfdale1333 D667 motherboard that came with a Celeron D 3.46 Mhz cpu. - 2 gig DDR2 RAM

As far as I could read, I can't upgrade to a Quad core with this board.

I was looking at an Intel Core 2 Duo E8400 - 3 GHz cpu. I can get this under $100. Is this really a step up? I never used dual cores and does this mean that it will run at 3 GHz times 2? Maybe you have a solution in the same price range but better cpu?

I do audio editing using Cakewalk Sonar 4 and some of those plugins are cpu intensive and normally push me into 95% causing me to slow down a lot. This only happens when running a number in realtime so double the power would do me fine.

Thanks.


  #2  
Old 09-07-2008
ladygreenwitch's Avatar
HR Director
My PC
 
Join Date: Jul 2005
Location: Bay Area California
Posts: 5,777
PC Experience: PC Illiterate
ladygreenwitch - See this Members User comments on their Profile page ladygreenwitch - See this Members User comments on their Profile page ladygreenwitch - See this Members User comments on their Profile page ladygreenwitch - See this Members User comments on their Profile page ladygreenwitch - See this Members User comments on their Profile page ladygreenwitch - See this Members User comments on their Profile page ladygreenwitch - See this Members User comments on their Profile page ladygreenwitch - See this Members User comments on their Profile page ladygreenwitch - See this Members User comments on their Profile page ladygreenwitch - See this Members User comments on their Profile page ladygreenwitch - See this Members User comments on their Profile page
Default Re: help upgrading to dual core

Hi Cool Dude,

Welcome to PCHF. We have some really expert hardware gurus on site, and I am sure that they will be able to give you the information that you are after.

Unfortunately, they are not online at present. I will forward this to the Tech Team Leader for assignment.

Hang out, look around, read up, and one of the team will be with you ASAP.

TTFN

LGW


  #3  
Old 09-07-2008
Gandalf's Avatar
Tech Support Team
My PC
 
Join Date: Apr 2007
Location: South Korea
Posts: 2,255
PC Experience: PC Guru
Gandalf - See this Members User comments on their Profile page Gandalf - See this Members User comments on their Profile page Gandalf - See this Members User comments on their Profile page Gandalf - See this Members User comments on their Profile page Gandalf - See this Members User comments on their Profile page Gandalf - See this Members User comments on their Profile page Gandalf - See this Members User comments on their Profile page Gandalf - See this Members User comments on their Profile page Gandalf - See this Members User comments on their Profile page Gandalf - See this Members User comments on their Profile page Gandalf - See this Members User comments on their Profile page
Default Re: help upgrading to dual core

Welcome to PCHF.

Since you don't actually have a problem but are looking for recommendations, I'm your man. I love giving advise.

First off, are you planning to migrate to Vista? If yes, is your application Vista compatible?

As for the dual CPUs and the clock speed, it depends on how you mean that. At best you've got two CPUs each working at 3GHz, if your application is programmed to utilize both CPU simultaneously. Not all software is. I would research my application to see if that is the case.

Just because the application says it's Vista compatible doesn't mean it will maximize the use of the Dual CPUs.

I hope that help with your decision making.
If I've missed something or you have additional questions, just let me know.

Good Luck...


Comments on this post
ladygreenwitch agrees: right on right on, good job Gandalf. Thanks
__________________
Klaatu Barada Nikto

  #4  
Old 09-07-2008
LoneWolf's Avatar
Tech Support Team
My PC
 
Join Date: Sep 2008
Location: Kelowna, BC
Posts: 358
PC Experience: Experienced
LoneWolf - See this Members User comments on their Profile page LoneWolf - See this Members User comments on their Profile page LoneWolf - See this Members User comments on their Profile page LoneWolf - See this Members User comments on their Profile page LoneWolf - See this Members User comments on their Profile page LoneWolf - See this Members User comments on their Profile page LoneWolf - See this Members User comments on their Profile page LoneWolf - See this Members User comments on their Profile page LoneWolf - See this Members User comments on their Profile page LoneWolf - See this Members User comments on their Profile page LoneWolf - See this Members User comments on their Profile page
Send a message via MSN to LoneWolf Send a message via Skype™ to LoneWolf
Default Re: help upgrading to dual core

I did a little hunting around and it appears that Cakewalk Sonar is capable of utilizing multiple core processing ability however it did not specify which version and I think that more than likely it would require a newer one than 4 since 5 is several years old already and 6 available.

Software that predates multi core processors likely would not benefit from it other than the fact that you still gain the extra power to run additional programs without slowing down cakewalk.

This is a snippet of feedback from a fellow running a Pentium D945 3.4Ghz Dual Core CPU ....

This processor was installed into a new computer that I recently built for gaming and audio recording. The system is designed around the 64-bit architecture of the processor including Windows Vista Ultimate 64-bit edition. The processor handles my 64-bit applications with great speed and high performance. The most intensive 64-bit application I have used so far is Cakewalk Sonar 6 Producer Edition. Sonar 6 Producer Edition runs natively in 64-bit but can also be used in a 32-bit environment in compatibility mode.

Recording audio files is a huge undertaking for any computer, but these days most can handle a single recording. But what I am doing is recording up to 32 tracks (32 individual audio inputs) all at one time. This is a serious task for any processor, and it is also very dependant on the speed of the hard drive and sound processor as well. I have had nothing but flawless recordings so far with not a single hiccup in timing or processing. Even with effects and EQ added to each individual track, recording and playback of 32 simultaneous tracks is not even considered work for this processor.

Each core is monitored by the software and the usage total for each core is displayed at the bottom of the working console. Neither core has ever gone beyond 35% during a recording session, which is more than acceptable for the heavy duty processing that is occurring during a session.



Last edited by LoneWolf; 09-07-2008 at 07:41 AM.
  #5  
Old 09-08-2008
New Poster
 
Join Date: Sep 2008
Posts: 2
PC Experience: Experienced
cooldude859 - See this Members User comments on their Profile page
Default Re: help upgrading to dual core

Thanks for all that great information. Its good to know that dual core means twice the listed speed. I use Sonar 4 which I know uses multiprocessing. The checkbox is listed but greyed out for the moment.

Thanks again for taking the time to help me out with this.

Joe



Reply
Satellite TV on your PC - over 3000 Channels! Click Here!

Bookmarks

Tags
answered , core , dual , upgrading

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are On

All times are GMT +1. The time now is 08:19 PM.
Powered by vBulletin
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0 RC7
All Graphics & Content Copyright © 2004-2008 - PC Help Forum.com


Back to Top