Hi I have an EasyNote Packard Bell Laptop 512 RAM 40 Gig Hard Drive. Just recently my CD/DVD stopped working for some strange reason. When I inputted any CD in the drive the light was still coming on but nothing getting picked up.

I then went on BIOS pressing F2. Here I noticed that the CD/DVD had been “Disbaled”. What caused this to happen I don’t have a clue.

I tried to search for an option for me to “enable” this but was unable to do so.

My BOIS read the following. INSYDE SOFTWARE SCU. Then have 4 option

Start Up / Chipset / Boot / Exit. Even though I try to click on to any option there is no way to Enable this.

The other option I have is F8, But this is the option from “Boot from CD”.

Please help.

Hello and welcome to PC Help Forum.

Have you tried right click on my computer scroll to properies and open click on hardware tab then device manager and enable it in there?

Hi Freind. Thank you for the reply. I had a look and guess what my cd/dvd has complletly disappeard from there.??/ Please help

Ok try this?Go into device manager and right click on your CD/DVD drive list and choose scan for hardware changes.

Or disconnect CD/DVD rom and reboot pc.Then turn pc off reconnect CD/DVD rom and reboot.

I can not even see any cd/dvd anywhere

Hi,go to device manager and at top it says computer right click on it and use scan for hard ware changes.See if it brings up the CD/DVD drives.

Look at the BIOS menu and you should see an option marked 'Advanced BIOS Features.' Use the up and down arrow keys and highlight this option then press Enter.In there click on the CD drive and enable it?

Could you open up the computer and check the cables have not become loose or unplugged?


Is SCSI in BIOS enabled/disabled?

Is this an IDE or SATA CD/DVD rom drive?

Does the drive show in BIOS?