Hello I have a little ram question....
I Have 4 sticks of PC 3200 ram and 2 of them says 2.5-8-4-4 on the label and the other 2says 2.5-6-3-3 on the label,I would like to know how should i set them up in CMOS DRAM Configuration Options....If any can help me out to set up these numbers to match it would be great....when I go to options this is how its setup in order from top to bottom:

CAS# Latency (Tcl) [2.5]
Min RAS# active time (Tras) [8]
RAS# to CAS# delay (Trcd) [4]
Row Precharge Time (Trp) [2]

Bottom of 32-bit [31-24] IO [C0]
S/W Memory hole Remapping [Enabled]
H/W Memory hole Remapping [Enabled]
MTRR Mapping Mode [Continuous]
DRAM Power Down Mode [Disabled]

Frame Buffer Size [64M]
PMU [Auto]
K8<->NB HT SPEED [5x]
NB---->SB HT SPEED [4X]
NB<----SB HT SPEED [4X]
K8<->NB HT Width [down16 up16]
Err94 Enh [Disabled]
System Bios Cacheable [Enabled]


Please somone help me out to fill out each box from top to bottom according to ram sticks descriptions I gave....tnx alot for any help....

Hello there Garnett
It looks like you are going to have to set the timings to those of the slowest modules. So set these

CAS Latency: 2.5
RAS Active time: 8
RAS to CAS Delay: 4
Row Precharge: 4
That should take care of it. If you have any further issues or questions, please let us know.