I just upgraded from 2x 512mb of ram, 184 pin to 4x 1gb DDR-400 G-Skill RAM, 184 pin. When I check to see what I am running at it only registers about 3300mb of RAM? I am running 32bit Vista Home. I have a 2.2ghz AMD processor dual core 3800+ with a MSI I believe its a K9 series mobo with an Nforce 4 chipset, and an 8600GTS graphics card. Is there any reason why it is not recognizing all of my RAM and is there a way to change it so that it will recognize it? The board is supposed to handle 8gigs I believe. Thanks.

Joe

Hi jmgonza6,
We have a staff of techs who have a wide variety of skills and will be able to help you with your problem, this is not my area of expertise, one of the folks who can help you should be along shortly.
Thank you
Cart

hmm... there is always less memory shown that there actually is.. but 700mb seems like an awful lot to lose... hmm... let me do a little searching. in the meantime, i reccomend you run memtest 86 overnight and see if you get any errors

have u tried installing 3 gig and seeing what it comes up as, i recommend installing one stick at a time and see what each stick registers as. If its simply a crook stick of ram you will most likely find it by checking each stick on its lonesome, time consuming, but fun? hehe

I thought 32Bit Os's could only support 3.5Gb of ram?I found this Article.I suggest you read it.If you

want all 4Gb seen you need a 64Bit operating system.

1024Mb is 1Gb of ram.That times 3.5 is 3584.Around what it can see.
Amd