my hard drive quit working on my it wont boot up and says something about hard drive boot fail or something it was a very old hard drive anyways so i was looking to buy a new one and i wanted to get a ide one because lastime i had the other kind sata it just wouldent work and i couldent figure it out so maybe my port things are broken idk but i found a 500gb western digital ide hd for 50 dollars on ebay witch seems like an amazing deal but i dont know a ton so was looking for help from experts here it is
SPECS:
Hard Drive Brand: Western Digital
Condition: Factory Sealed with 3 Years Warranty
Rotational Speed (RPM): 7200
Capacity: 500GB
Drive Type: Enhanced IDE (ATA-6 or PATA)
Buffer Size: 16MB
Product Life: 5 years or 20,000 Power-On Hours
Form Factor: 3.5" for Desktop Computers / Macs
Dimensions (mm): 26.1 (H) by 101.6 (W) by 147 (D)
Interface Transfer Rate: Maximum of 300MB/sec
Weight: 450g to 680g or 17oz to 25oz
Package: This drive is bulk packaged and does not come with wires, software or any hardware.
also if this is a decent harddrive that i could consider buying if there is a way to transfer data from a "broken" harddrive to my new one that would save a lot of time but is not completly necesary
thanks a lot
SPECS:
Hard Drive Brand: Western Digital
Condition: Factory Sealed with 3 Years Warranty
Rotational Speed (RPM): 7200
Capacity: 500GB
Drive Type: Enhanced IDE (ATA-6 or PATA)
Buffer Size: 16MB
Product Life: 5 years or 20,000 Power-On Hours
Form Factor: 3.5" for Desktop Computers / Macs
Dimensions (mm): 26.1 (H) by 101.6 (W) by 147 (D)
Interface Transfer Rate: Maximum of 300MB/sec
Weight: 450g to 680g or 17oz to 25oz
Package: This drive is bulk packaged and does not come with wires, software or any hardware.
also if this is a decent harddrive that i could consider buying if there is a way to transfer data from a "broken" harddrive to my new one that would save a lot of time but is not completly necesary
thanks a lot




























Linear Mode

