How full?How much free space?

Yes you should be able to do most of the cleanups in safe mode.

I think your main drive needs some more free space?

You have done HJK logs and posted them here on forum?Were they clean or fiixed or still require work?

Read on the links I posted about BIOS update.Use the live update feature.

sorry havent been able to get to a computer lately.
i have 9 gb on main drive and 25 gb on slave.
i tried the live update (in safe mode) and it says Warning!!!
Your Display Card does not support MSI Live Update 3TM function.

Note: MSI Live Update 3TM support the Display Card of MSI only.
does that mean its the wrong motherboard?

i removed the BHO Pando...in the hijackthis.
ive attached new log also

Attached Files

hijackthis051808.log (17.5 KB, 2 views)

As I see no more problems I will hand you over to another forum and see if they can help...

i freed up some more space on both hard drives. i have 18 gb on master and 14 gb on slave now. i tried rebooting into reg windows mode but it still freezes as soon as i put in my password.

Hello fay could you got to your user CP and post as much computer information as possible in there for me and check the box show others.This can aid in helping to resolve your computer problems.

How much free space do you have on your hard drive?
Have you downloaded any recent software?

Thankyou.

Edit:I will merge your threads as to get all the help in one place.Could you run Belarc.com there advisor and copy n patse ONLY the hardware for me.IE:Mainboard/RAM/graphics card/etc.

19.38 GB free on C drive
15.05 GB free on E drive
Both hard drives are 40 gig
The last thing I remember downloading was TNT Capture from giveawayoftheday.com
But I removed it and then I did system restore and went back to May 1. I was instructed to do so. I figured that would have been far enough before I started having problems.

I had to run Belarc Advisor in safe mode, so there was no info for main circuit board and system model

Processor a Main Circuit Board b 2.20 gigahertz Intel Celeron
8 kilobyte primary memory cache
128 kilobyte secondary memory cache

80.03 Gigabytes Usable Hard Drive Capacity
34.42 Gigabytes Hard Drive Free Space
LITE-ON COMBO LTC-48161H [CD-ROM drive]
3.5" format removeable media [Floppy drive]

IC USB Storage-CFC USB Device [Hard drive] -- drive 2
IC USB Storage-MMC USB Device [Hard drive] -- drive 4
IC USB Storage-MSC USB Device [Hard drive] -- drive 5
IC USB Storage-SMC USB Device [Hard drive] -- drive 3
WDC WD400BB-00JHC0 [Hard drive] (40.02 GB) -- drive 1, s/n WD-WCAM96918336, rev 05.01C05, SMART Status: Healthy
WDC WD400EB-00CPF0 [Hard drive] (40.02 GB) -- drive 0, s/n WD-WCAATF646256, rev 06.04G06, SMART Status: Healthy

80.03 Gigabytes Usable Hard Drive Capacity
34.42 Gigabytes Hard Drive Free Space

LITE-ON COMBO LTC-48161H [CD-ROM drive]
3.5" format removeable media [Floppy drive]

Memory Modules c,d 1248 Megabytes Installed Memory

Display SiS 650_651_M650_740 [Display adapter]
Multimedia C-Media AC97 Audio Device
Bus Adapters Multimedia StarPort Storage Controller (Lite)
SiS 7001 PCI to USB Open Host Controller (2x)
SiS PCI to USB Enhanced Host Controller

Controllers Standard floppy disk controller
Primary IDE Channel [Controller]

Communications HSP56 MR [Modem
Realtek RTL8139/810X Family PCI Fast Ethernet NIC

I hope I gave you enough info

Secondary IDE Channel [Controller]
SiS PCI IDE Controller

I wish I could figure this problem out on my own. I took a pc repair class and i got an A. But this problem is just beyond me. I love to troubleshoot computers. I want to someday build my own.