Hi Zanc, those temps look great.
This is the only thing about Speedfan, it's very difficult without plugging in one fan at a time to know for certain which is which. Any temperature sensor Speedfan is not sure of, it will refer to it as "Temp".
You'll normally find:
-
Temp1 = Motherboard,
-
Temp2 =
CPU (Motherboard Sensor),
-
Temp3 = Aux.
^ Temp1 and 2 can sometimes be back to front, but I'm juding by your temps listed there, the above is correct in your case.
You'll always see your HDD's listed properly as "HD1", "HD2" etc.
"Core" is your
CPU temperature sensor for each core of the
CPU. If you have dual core for example, you'll see Core 0 and Core 1.
I haven't a clue what that "Temp -36" is. Speedfan will pickup and temp sensor it can find. It's not unusual to find one mis-reported as a minus figure.