hey all i am back once again you all ave helped me out so much in the past and i am very gratefull for all you all have done my mom has ahd this dig camera for 2 years it is an Exilim dig camera EX-S2/EX-M2 with charger/port to down load the pics to the pc it has been working fine but recently it stoped d/l the pics and when we use the camera and scaner wizzard it only picks up the printer/scanner we have tryed to reinstall the drivers for it and we configured the camera/scanner wizzard for the cam but it still dont work and it still dont automatically d/l the pics like it used to we have even went through all of the options in the camera
the pc is a

compaq presario
PIII 700 MHz
Nvidia G-Force MX4000 graphics card
30 gig main hd
5 gig backup
30 gig secondary
os is Xp home sp/2

it is driving my mom nuts pls help before she drives me insane :icon_scra

Hey there Lt Ozzy

Do you have a USB cable that can connect the camera straight to the PC, if you do could you try doing this.

• Does the PC detect when you plug the cable into the camera?(remember you need to turn the camera on)
• If you open My Computer does an extra drive appear?

Alternatively try plugging the current charger/port into a different USB slot on your PC.

yes it does have a usb cable its the only way to hook it to the pc and yes a new storage opens up titled camera in the my computer window but it dont d/l when you turn it on like it used to :cry:

If you double click on the camera icon it should open another window which may contain something like DCM100. Basically open the folder and see whether you can see the photos.

If you can then we can confirm that the camera and link are working the only thing that would be the problem is the software for the camera.

• Do you have the CD that came with your camera?

yes i do have a cd for the camera but we never had to install the software in the past we have tryed the software recently and it still sint the same

Checkout this guide from the microsoft site,
http://www.microsoft.com/resources/d...amera_add.mspx

You should be able to link it to the program you want.

If this doesn't work then I recommend uninstalling the drivers your installed along with anything you installed from the CD, then restart your PC and plug the camera back in.

• Do you remember the name of the program that used to run when you plugged the camera in?