Hi!

I have bought recently an MG416 case but I have some problems with the LCD. The case is 'forgetting' the fan speed settings if I shut down the computer, however the alarm temperature setting remains.

Another thing: at the startup there is a very annoying strong beep comming from the front panel. I've desactivated the speaker, but the beep is still there.

Are these things with your case too, or have I a faulty one?

Hya Trastevere , welcome to PCHF.


I dont think Koreanstown will respond im afraid , he has been Last Active at 10-24-2004.

Hi there!

Nobody can help me with the case Delux mg416 problem?

I have LCD functions problem also.

I own this case and the problem for my case is that the LCD resets after every shut down of my PC.

The speed of my two coolers starts as I left it, but nothing else works, every wake-up alarm i record is just forgoten, the time is by default set to the working time and not to digital clock (which is reset also to 00:00 and 1 ianuary 2004).

These are not the worst things happening to this case. I build my own PC, and its not my first one, but in this one i could not connect my motherboard usb to the front usb of the case (the small pannel with 2 usb below the front LCD). I examined the manual of both my ASUS A8N SLI DELUXE motherboard and the case one. Nothing to do! All connected as it should and no response.

Also, the second problem, and by far the biggest: 2 months after building the pc, the LCD just did not powered when the power on was pushed. The LCD had to be 'pushed' inside the case for the power to function as it should. This lasted for about 2 months, and it just 'self repaired'.

This case is their top-model, so it is a little strange.

PS: The beep will never disappear, it signals the LCD has started.

Welcome to the forum!

Ok, question time...is the case under warranty and have you contacted the manufacturer as I am sure they would like to know about your problems?

Hello Dan!

Have you solved your LCD problem?